HOME

INVENTORY 

NEW ARRIVALS

CONTACT

 

NEW ROLLING MILLS FOR LONG PRODUCTS

 

 

 

MEMBER OF:

 

 

Redstone Machinery LLC

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Cold Strip Mills

Tandem Cold Strip Mills, Reversing Cold Strip Mills, Non-reversing Reduction and Temper Mills, Cold Sendzimir Mills

 

NOTE: These are partial listings.  If you do not find the equipment you are looking for, please contact us with the details of your inquiry.

STLV-211504  51" Siemens VAI Clesim Tension Leveling and Tempering Line.  New: 1989; Strip width: 600 - 1,300 mm (23.6" - 51.2"); Strip thickness: 0.2 - 1.5 mm (.0079" - .059"); Main Components: Coil Car, Payoff, Leveler, Strip Welder, Edge Trimmer, 4-Hi Temper Mill, Tension Leveler, Electrostatic Strip Oiling Unit, Cut-Off Shear, Recoiler, Lubrication, Cooling, Electrical System.  Very Good Condition.
RFNR-211504  26" Waterbury Farrel Temper Mill.  New: 1978; Hydraulic Screwdowns; Max. Strip width: 660 mm (26")'; Max. Strip thickness: 4 mm (.157"); Coil weight: 12 MT (26,455 lbs); Work Rolls diam.: 254 mm (10"), Back-up Rolls Diam.: 508 mm (20"); Roll width: 762 mm (30"); Main Drive: 373 kW; Complete with Cooling, Lubrication, Drives and Controls. 
RFCR-210208  6" x 18" x 18" RWF Cold Reversing Mill: Strip width: 380 mm (14.96"); Strip Thickness: 0.30 - 5.00 mm (.012" - .197"); Rolling Speed: 0 - 150 m/min (492 FPM); Main Motor: 250 kW; Andritz Hydraulic Roll Adjustment; Complete.
RFCR-210308  4" x 14" x 14" RWF Cold Reversing Mill: Strip width: 300 mm (11.81"); Strip Thickness: 0.20 - 2.50 mm (.008" - 0.98"); Rolling Speed: 0 - 100 m/min (328 FPM); Main Motor: 150 kW; Electromechanical Roll Adjustment; Complete.
RFCR-100713  8" Stainless Strip Rolling Plant: New: 1987, Inlet Strip: 250 mm x 3.5 mm (max), coil: 1 MT; Exit Strip: Annealed, 200 mm (max) x 0.1 mm (min), coil: 1 MT; Equipment: 2-Hi Reversing Roughing Mill, Roll diam: 430 mm, 185 kW DC; Slitting Line; 4-Hi Finishing Reversing Mill, Work Roll diam: 150 - 180 mm, Backup Roll Diam: 400 mm; Ebner Continuous Annealing Furnace.  The plant was used for rolling stainless, carbon and spring steel with yield strength of up to 70 kg/mm2.