Redstone Machinery LLC

NOTE: These are partial listings. If you do not find the equipment you are looking for, please contact us with the details of your inquiry.

STRS-101218 4-3/4" Kieserling VRUWN 120/150 9-Roll Black Bar Straightener. Bar Diameter: 40 - 120 mm (1.57" - 4.72"); Straightening Speed: 22/30/45 m/min. (72/98/148 FPM); Components: Straightener Body, Universal Spindles, Gearbox, Motor, Rolls installed on the machine (no channels, tables, controls).
STRS-001426 4" Bar Finishing and Testing Line. New: 2007/2008; Manufacturer: Vascaz, Foerster, others; Bar Diameter: 18 - 102 mm (.7" - 4"); Bar Length: 5 - 12 m (16'5" - 39'4"); Annual Capacity: 90,000 MT. The line is designed to process black bars with up to 800 N/mm2 (116,000 PSI) tensile strength and 860 N/mm2 (260 HP, 125,000 PSI) hardness. Line components: Inlet Table with Descrambler; 2-Roll Vertical Bar Straightener with Hydraulic Roll Backup; Bar Saw; Double Chamfering Line; Inspection and Testing Station with Foerster Magnatest; Defective Bar Restoration; Bundling and Strapping; Bar Storage with 600 MT capacity; Transfer Equipment; Hydraulics; PLC Controls; Spares and Documentation.
STPL-001967 Danieli 10-Roll Multi-Strand Shape Straightener. New: 2003; Double housing design; 5 top driven and 5 bottom idle rolls; Roll Diameter: 525 mm (20.67"); Roll Width: 1,200 mm (47.24"); Horizontal Pitch: 530 mm (20.87"); Main Drive: 710 kW AC; Capabilities: up to 4" x 3/8" Equal Angles, 5" x 3" x 1/2" Unequal Angles, 6" x 13" Channels, 6" x 1" Flats, 3" Squares, 3" Rounds, #18 Rebar; Productivity: up to 150 tons per hour.
PCBT-201874 90 TPH STG Automatic Medium Section Bundling Plant. Installed in 2011 at an exit of a 90 TPH Medium Section Mill; Profile sizes: Flats: 120 - 260 mm (4.72" - 10.24"), Angles:100 x 100 x 6 - 150 x 150 x 12 mm (3.94" x 3.94" x .24" - 5.91" x 5.91" x .47"); Channels: 100 - 260 mm (3.94" - 10.24"), I-beams: 120 - 200 mm (4.72" - 7.87"), Other similar; Bundle sizes: Length of 6 and 7 m (19'8" and 23') - weight: 2.5 - 5 MT (2.76 - 5.51 US tons), Length of 12 and 18 m (39'4" - 59'1") - weight: 5 MT (5.51 US tons); Bundle width: 250 - 580 mm (9.84" - 22.83"),Bundle height: 120 - 580 mm (4.72" - 22.83"); The line includes: Exit Roller Conveyors from two straighteners (straighteners not included), Chain Transfers to a single Roller Conveyor, Cradles for rejected bar, Roller Conveyor and Chain Transfer to the Stacker, Automatic Magnetic Stacker, Tying Station, Bundle Conveyor with Exit Table, Complete Hydraulics (Rexroth) and Electrics (Siemens).
TRUT-011322 Knorr Technic NDT Line. New: 1996; Used for rails; Components: Pinch Roll and Brush Cleaning; Straightness Measurement (5H + 5V Laser Sensors), Profile Measurement (4 Lasers + 6 Cameras), Transfer to ED with Pinch Roll Guiding; Eddy Current Testing (Circograph system, 7 Rotating Probes Circoscan and 6 Fixed Probes, Signal Processing Equipment by Dr. Foerster), Guiding Pinch Roll, Ultrasound Testing Unit (2 Testing Cabins, Water Pumping with Filtration), Guiding Pinch Roll, Multicolor Defect Marking Unit, Complete Controls; Very Good Condition - almost unused.
FDLP-000143 250 mm Danieli Double Pinch Roll Tail Brake. Roll Diam.: 250 mm (9.8"); Driven by two 40 kW DC Motors; Max. Bar Speed: 22 m/s (4400 FPM); Complete and fully reconditioned - like new; 2 units available (double pinch roll each)